idChamp RS3 Bluetooth NFC-HF Reader 14443A/15693 CSN - DURABLE


idChamp RS3 NFC-HF reader is a flexible Bluetooth wireless RFID reader for badges NFC Mifare, ICODE, Tag-it (see more below) 
Maximum host support is provided with Bluetooth SPP, Bluetooth HID (keyboard), and Bluetooth LE (Low Energy) modes.

Our form fit durable case will protect your portable reader from water, dust, and shock.  Inductive wireless charging is also available when you order the durable enclosure.

NOTE: must open the drybox to charge and configure the idChamp

IDChamp RS3 NFC-HF can also work via USB and RS-232 connections with optional cables from Serialio.com.
This reader is a member of the Near Wave™ RFID solution family.

In Bluetooth keyboard mode, it connects to iPad, iPhone, iTouch, Windows, OSX and more. 
Like a Bluetooth keyboard NFC RFID tags can be read to all iOS applications.

In Bluetooth SPP mode connect with many Serialio.com applications like Android versions of SerialMagic Gears, Grid-In-Hand® Mobile Grid, Order-In-Hand® Mobile Order, List-In-Hand® Mobile List, and more. If you prefer, write your own software using SerialMagic APIs. 

idChamp RS3 NFC-HF Bluetooth Reader can read a badge/tag every 2 seconds for up to 12 hours* on a single charge with the internal rechargeable battery.
*over 24,000 scans, performance may vary with battery life and scan rate.

Battery charge time (1500mAh battery model) about 4 hours from full discharge.
Dimensions: 100.90 x 51.40 x 22.25 mm (3.972 x 2.02 x 0.876 in) Weight: (1500mAh battery model): 113 grams (4 oz)

BEFORE YOU BUY...
See this page for more details on setup options for idChamp RS3

The bridge micro-USB to RS-232 cable is HIGHLY RECOMMENDED and can also be used to setup and power/charge the bridge with the USB to RS-232 adatptor cable.

Get the micro-USB to RS-232 cable for idChamp RS3.

Get the USB to RS-232 adaptor with power on PIN9 for use with the bridge cable (and more).

Supported Tags NFC (HF 13.56MHz): (Partial List)
Note: Read engine must match card/tag type. e.g. 14443A/15693, iClass, and Flica are different engines.
14443A/15693 CSN MIFARE® CSN
iCLASS® CSN 1Sielox
MIFARE® DesFire CSN 1XceedID®
2*Felica



PHOTOS

ATTACHMENTS

ENDORSEMENTS

Search by keyword

Filter Your Search

Product or Service

Vendor product directory

A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z

!D Gate

The !D Gate is a modern, open pedestal that is mounted on the floor. Because it is an integrated reader, both the reader and antennae are included. It supports processes like goods receiving, transition from stock room to sales floor and anti-theft (EAS). Depending on the role, the optimum RFID parameters are chosen automatically.

!D Hand 2 - RAIN RFID handheld reader

The !D Hand 2 is Nedap’s 2nd generation RAIN RFID handheld reader, especially designed for in-store retail applications. Its high reading performance in combination with its intuitive, fashionable design make it the ideal device for store staff to work with.

!D POS

The !D POS is an integrated reader to be used for reading items at the point-of-sale station. It has a small, rugged casing that can be mounted under the cash desk. The antenna only reads items on top of the reader, while ignoring items below or next to the antenna, due to the built-in shielding. It can be connected via USB or Ethernet, while the power can be supplied by a local power supply.

!D Top

The !D Top is a state-of-the-art integrated reader that can easily be mounted on the wall or to the ceiling - using almost invisible steel cables. Its elegant, compact design blends into every store, keeping the entrance of the store or the passage to the stock room wide open. At the store entrance, the !D Top can be used stand-alone as RFID-based EAS system or used as an addition to existing traditional EAS systems.

"LANTERN™" Integrated All-In-One Hands Free RFID Reader with LED Light

The MonsoonRF Inc. Lantern™ series of RFID readers are Impinj Indy R2000 or Indy RS2000 based RFID systems, comprising the integrated UHF reader, Antenna, controlled LED, and Communications System (a complete system-in-package). Lantern™ installation involves a simple connection to a common AC power source (110VAC or 240VAC depending on Region). When connected, the integrated light will be on, and it can be directed at tagged items. The package design allows the Lantern™ to be attached to a lighting

"The InfoChip App" NFC App for iPhone and Android

The InfoChip App, to be released on iPhone and Android, brings forth a profound revolution in safety compliance, inspection management and industrial asset management. The InfoChip App enables you to "Interact With Your Assets" where and when you need to, using your NFC-enabled smartphone and InfoChip's complete line of extremely durable NFC RFID tags.

by   InfoChip

[D.O.Tel] DOTH-100

More Powerful Mobile POS Customer Orientation POST Terminal User Orientation United Terminal

[D.O.Tel] DOTH-300C (UHF Compact Type)

The tool that keeps up with your mobile workers DOTel’s DOTH-300C UHF compact enables you to advance your business to a next level of your business by managing your inventory efficiently. The DOTH-300C is loaded with the features you want in a lightweight mobile computer like 1D/2D Barcode Scanners, UHF RFID readers, 3G HSUPA wireless, Bluetooth Ver2, integrated A-GPS and 802.11 b/g WLAN connectivity.

First Previous 1 2 3 4 5  ... Next Last